Infinity Cleaning Solution offers post-construction clean up and renovation cleaning services at approximately $0.20-$0.26 per square foot.
These services will include:
Remove trash. Remove labels and stickers. Remove painter's tape and masking tape as needed. Polish mirrors. Vacuum heating, ventilation and air conditioning vents. Wipe down vent grilles. Wipe down baseboards, chair rails, crown molding and door trim. Wipe down window trim and clean sills. Wipe off door hardware. Clean light fixtures. Vacuum carpeting. Sweep debris from floors. Mop floors.
Remove trash. Remove labels and stickers from fixtures. Clean and polish faucets. Clean countertops and backsplash. Polish mirror. Wipe down cabinet fronts. Clean and polish shower tile and surfaces. Polish shower faucets, shower heads and drain. Clean and polish tub and tub surround. Polish tub faucets and drain. Wipe off towel racks, bars and rings. Clean toilet, urinal and any other fixtures. Clean inside cabinet and vanity drawers. Clean inside vanity shelves and spaces behind doors. Clean any tile work on walls or around windows and doors.
Remove trash. Clean sinks and polish faucets. Wipe down cabinet fronts and exposed sides. Remove any items in cabinet drawers and place on the countertop. Clean insides of cabinets and drawers. Clean cabinet shelves. Clean and polish countertops. Remove tags and labels from the appliances and sinks. Clean and polish surface of appliances. Clean under sinks.
For an additional $0.05-$0.07 per square foot we will also include:
Collect trash and debris and dispose of it in the dumpster. Sweep and hose down entryways, porches, patios and walks. Wipe down handrails and door hardware. Wipe down house numbers and mailbox/mail slot. Wipe down air conditioner chiller. Clean out basement window wells. Clean stucco, concrete and paint or stain off outside faucets and vents. Wipe down soffits. Check and clean gutters. Clean exterior lights and check for broken bulbs.
Remove trash. Vacuum furnace surfaces, hot water heater and washer/dryer connection points. Clean stairs and landings, and wipe down balusters and handrails. Wipe off tops, sides and bottoms of exposed duct work. Wipe off door hardware.